#!/bin/bash
# 咸v咆哮制作

# x-ui 多架构自动安装脚本
# 支持: amd64, 386, arm64, armv5, armv6, armv7, s390x
# 默认配置: 端口 8443, 账号 3344, 密码 3344
# 咸v咆哮制作 - 一键搞定所有架构！

set -e  # 遇到错误立即退出

@@ -12,6 +13,7 @@ GREEN='\033[0;32m'
YELLOW='\033[1;33m'
BLUE='\033[0;34m'
PURPLE='\033[0;35m'
CYAN='\033[0;36m'
NC='\033[0m' # No Color

# 自定义配置
@@ -42,23 +44,60 @@ warn() { echo -e "${YELLOW}[WARN]${NC} $1"; }
error() { echo -e "${RED}[ERROR]${NC} $1"; }
step() { echo -e "${BLUE}[STEP]${NC} $1"; }
debug() { echo -e "${PURPLE}[DEBUG]${NC} $1"; }
cyan() { echo -e "${CYAN}$1${NC}"; }

# 显示大字标题
show_banner() {
    echo
    echo -e "${CYAN}"
    echo " ███████╗██╗  ██╗    ██╗   ██╗██╗"
    echo " ╚══███╔╝╚██╗██╔╝    ██║   ██║██║"
    echo "   ███╔╝  ╚███╔╝     ██║   ██║██║"
    echo "  ███╔╝   ██╔██╗     ██║   ██║██║"
    echo " ███████╗██╔╝ ██╗    ╚██████╔╝██║"
    echo " ╚══════╝╚═╝  ╚═╝     ╚═════╝ ╚═╝"
    echo
    echo -e "${RED}╔════════════════════════════════════════╗"
    echo -e "║                                            ║"
    echo -e "║   ${YELLOW}🚀 超强多架构 X-UI 一键安装脚本 ${RED}       ║"
    echo -e "║                                            ║"
    echo -e "║   ${GREEN}📦 支持所有主流CPU架构 ${RED}                ║"
    echo -e "║   ${BLUE}⚡ 自动检测 + 自动配置 ${RED}                  ║"
    echo -e "║   ${PURPLE}🎯 咸v咆哮制作 - 专治各种不服！ ${RED}       ║"
    echo -e "║                                            ║"
    echo -e "${RED}╚════════════════════════════════════════╝"
    echo -e "${NC}"
}

# 显示咆哮信息
show_roar() {
    echo
    echo -e "${RED}╔══════════════════════════════════════════════════╗"
    echo -e "║                                                      ║"
    echo -e "║  ${YELLOW}🔥 咸v咆哮宣言：${RED}                                  ║"
    echo -e "║                                                      ║"
    echo -e "║  ${GREEN}「管你什么架构，老子一键搞定！」${RED}                 ║"
    echo -e "║  ${CYAN}「AMD、Intel、ARM、IBM... 通通拿下！」${RED}            ║"
    echo -e "║  ${PURPLE}「拒绝复杂操作，只要简单粗暴！」${RED}                 ║"
    echo -e "║                                                      ║"
    echo -e "${RED}╚══════════════════════════════════════════════════╝"
    echo -e "${NC}"
}

# 检测系统架构
detect_architecture() {
local arch=$(uname -m)
    step "检测系统架构: $arch"
    step "🔍 正在检测系统架构..."
    cyan "👉 当前架构: $arch"

# 映射到对应的下载架构
if [[ -n "${ARCH_MAP[$arch]}" ]]; then
DETECTED_ARCH="${ARCH_MAP[$arch]}"
        info "检测到架构: $arch → $DETECTED_ARCH"
        info "🎯 架构识别: $arch → $DETECTED_ARCH"
else
        error "不支持的架构: $arch"
        error "❌ 不支持的架构: $arch"
echo
        info "支持的架构:"
        for key in "${!ARCH_MAP[@]}"; do
            echo "  $key -> ${ARCH_MAP[$key]}"
        done
        show_arch_info
exit 1
fi
}
@@ -69,22 +108,23 @@ build_download_url() {
DOWNLOAD_URL="${BASE_URL}/${filename}"
DOWNLOAD_FILENAME="$filename"

    info "下载文件: $DOWNLOAD_FILENAME"
    debug "下载URL: $DOWNLOAD_URL"
    info "📥 下载文件: $DOWNLOAD_FILENAME"
    debug "🔗 下载URL: $DOWNLOAD_URL"
}

# 检查 root 权限
check_root() {
if [ "$EUID" -ne 0 ]; then
        error "请使用 root 权限运行此脚本"
        info "尝试使用: sudo bash $0"
        error "❌ 请使用 root 权限运行此脚本！"
        info "💡 尝试使用: ${CYAN}sudo bash $0${NC}"
exit 1
fi
    info "✅ Root权限检查通过"
}

# 安装依赖
install_dependencies() {
    info "检查并安装必要的依赖..."
    info "📦 检查并安装必要的依赖..."

if command -v apt-get >/dev/null 2>&1; then
# Debian/Ubuntu
@@ -100,44 +140,47 @@ install_dependencies() {
# Alpine
apk add wget tar curl sqlite
else
        warn "无法确定包管理器，跳过依赖安装"
        warn "⚠ 无法确定包管理器，跳过依赖安装"
fi
    info "✅ 依赖安装完成"
}

# 下载 x-ui
download_xui() {
    info "开始下载 x-ui..."
    info "📥 开始下载 x-ui..."

# 检查是否已存在文件
if [ -f "$DOWNLOAD_FILENAME" ]; then
        warn "发现已存在的文件 $DOWNLOAD_FILENAME"
        read -p "是否重新下载? (y/N): " -n 1 -r
        warn "📁 发现已存在的文件: $DOWNLOAD_FILENAME"
        read -p "🔄 是否重新下载? (y/N): " -n 1 -r
echo
if [[ $REPLY =~ ^[Yy]$ ]]; then
rm -f "$DOWNLOAD_FILENAME"
else
            info "使用已存在的文件"
            info "✅ 使用已存在的文件"
return 0
fi
fi

# 下载文件
    info "正在下载，请稍候..."
    info "⏬ 正在下载，请稍候..."
    cyan "💾 文件: $DOWNLOAD_FILENAME"
    
if wget --progress=bar:force "$DOWNLOAD_URL" -O "$DOWNLOAD_FILENAME"; then
        info "下载完成"
        info "✅ 下载完成！"
else
        error "下载失败，请检查网络连接和URL"
        error "URL: $DOWNLOAD_URL"
        error "❌ 下载失败！"
        error "🔗 请检查URL: $DOWNLOAD_URL"
exit 1
fi
}

# 解压并手动安装
extract_and_install() {
    info "解压文件..."
    info "📂 解压文件..."

if [ ! -f "$DOWNLOAD_FILENAME" ]; then
        error "文件 $DOWNLOAD_FILENAME 不存在"
        error "❌ 文件 $DOWNLOAD_FILENAME 不存在"
exit 1
fi

@@ -146,8 +189,9 @@ extract_and_install() {
mkdir -p x-ui-temp

# 解压文件
    cyan "🔓 正在解压 $DOWNLOAD_FILENAME..."
if ! tar zxvf "$DOWNLOAD_FILENAME" -C x-ui-temp; then
        error "解压失败，文件可能已损坏"
        error "❌ 解压失败，文件可能已损坏"
exit 1
fi

@@ -159,11 +203,11 @@ extract_and_install() {
cd x-ui
fi

    info "开始手动安装 x-ui..."
    info "🔧 开始手动安装 x-ui..."

# 检查必要的文件
if [ ! -f "x-ui" ]; then
        error "未找到 x-ui 可执行文件"
        error "❌ 未找到 x-ui 可执行文件"
ls -la
exit 1
fi
@@ -175,7 +219,7 @@ extract_and_install() {
fi

# 手动安装
    info "执行手动安装..."
    info "⚡ 执行手动安装..."

# 停止可能存在的旧服务
systemctl stop x-ui 2>/dev/null || true
@@ -211,11 +255,12 @@ extract_and_install() {

# 返回原目录
cd - > /dev/null
    info "✅ 文件安装完成"
}

# 配置系统服务
setup_service() {
    info "配置系统服务..."
    info "🔌 配置系统服务..."

# 如果服务文件不存在，创建它
if [ ! -f "/etc/systemd/system/x-ui.service" ]; then
@@ -236,19 +281,20 @@ RestartSec=5s
[Install]
WantedBy=multi-user.target
EOF
        info "创建了 systemd 服务文件"
        info "📄 创建了 systemd 服务文件"
fi

systemctl daemon-reload
systemctl enable x-ui
    info "✅ 系统服务配置完成"
}

# 自定义配置面板
customize_panel() {
    step "开始自定义配置面板..."
    step "🎛️  开始自定义配置面板..."

# 停止服务以进行配置
    info "停止 x-ui 服务进行配置..."
    info "🛑 停止 x-ui 服务进行配置..."
systemctl stop x-ui 2>/dev/null || true

# 等待服务停止
@@ -259,82 +305,77 @@ customize_panel() {

# 初始化数据库（如果不存在）
if [ ! -f "/etc/x-ui/x-ui.db" ]; then
        info "初始化数据库..."
        info "🗃️  初始化数据库..."

# 启动服务以创建初始数据库
if systemctl start x-ui; then
sleep 5
systemctl stop x-ui
sleep 3
else
            warn "服务启动失败，尝试直接创建数据库结构"
            # 这里可以添加直接创建数据库的逻辑
        fi
        
        if [ ! -f "/etc/x-ui/x-ui.db" ]; then
            warn "无法自动创建数据库文件，将在首次启动时创建"
            return 0
            warn "⚠ 服务启动失败，尝试直接创建数据库结构"
fi
fi

# 修改配置（如果数据库存在且可写）
if [ -f "/etc/x-ui/x-ui.db" ] && command -v sqlite3 >/dev/null 2>&1; then
        info "设置面板端口为: $PANEL_PORT"
        cyan "🔧 设置面板端口: $PANEL_PORT"
sqlite3 /etc/x-ui/x-ui.db "UPDATE setting SET value = '$PANEL_PORT' WHERE key = 'port';" 2>/dev/null || true

        info "设置面板账号: $PANEL_USERNAME, 密码: $PANEL_PASSWORD"
        cyan "👤 设置面板账号: $PANEL_USERNAME"
        cyan "🔑 设置面板密码: $PANEL_PASSWORD"
sqlite3 /etc/x-ui/x-ui.db "UPDATE users SET username = '$PANEL_USERNAME', password = '$PANEL_PASSWORD' WHERE id = 1;" 2>/dev/null || true

sqlite3 /etc/x-ui/x-ui.db "UPDATE setting SET value = 'false' WHERE key = 'hasDefaultCredential';" 2>/dev/null || true
        info "自定义配置完成"
        info "✅ 自定义配置完成"
else
        warn "无法自动配置数据库，请在安装后手动修改配置"
        warn "⚠ 无法自动配置数据库，请在安装后手动修改配置"
fi
}

# 配置防火墙
setup_firewall() {
    info "配置防火墙..."
    info "🔥 配置防火墙..."

# 检查防火墙状态
if command -v ufw >/dev/null 2>&1 && ufw status | grep -q "active"; then
# ufw
ufw allow ${PANEL_PORT}/tcp comment "x-ui Panel"
ufw allow 10000-20000/tcp comment "x-ui Proxy Ports"
        info "UFW 防火墙已配置"
        info "✅ UFW 防火墙已配置"
elif command -v firewall-cmd >/dev/null 2>&1 && firewall-cmd --state >/dev/null 2>&1; then
# firewalld
firewall-cmd --permanent --add-port=${PANEL_PORT}/tcp
firewall-cmd --permanent --add-port=10000-20000/tcp
firewall-cmd --reload
        info "Firewalld 防火墙已配置"
        info "✅ Firewalld 防火墙已配置"
elif command -v iptables >/dev/null 2>&1; then
# iptables
iptables -I INPUT -p tcp --dport ${PANEL_PORT} -j ACCEPT
iptables -I INPUT -p tcp --dport 10000:20000 -j ACCEPT
        info "iptables 规则已添加"
        info "✅ iptables 规则已添加"

# 尝试保存 iptables 规则
if command -v iptables-save >/dev/null 2>&1; then
iptables-save > /etc/iptables.rules 2>/dev/null || true
fi
else
        warn "未检测到防火墙，跳过配置"
        warn "⚠ 未检测到防火墙，跳过配置"
fi
}

# 启动服务
start_service() {
    info "启动 x-ui 服务..."
    info "🚀 启动 x-ui 服务..."

systemctl daemon-reload
systemctl enable x-ui

# 启动服务
if systemctl start x-ui; then
        info "x-ui 服务启动命令执行成功"
        info "✅ x-ui 服务启动命令执行成功"
else
        error "x-ui 服务启动失败"
        error "❌ x-ui 服务启动失败"
return 1
fi

@@ -343,25 +384,25 @@ start_service() {

# 检查服务状态
if systemctl is-active --quiet x-ui; then
        info "✓ x-ui 服务运行正常"
        info "✅ x-ui 服务运行正常"

# 显示服务状态
echo
systemctl status x-ui --no-pager -l
else
warn "⚠ x-ui 服务未运行，检查日志中..."
systemctl status x-ui --no-pager -l
        warn "尝试手动启动: systemctl start x-ui"
        warn "💡 尝试手动启动: systemctl start x-ui"
fi
}

# 验证安装
verify_installation() {
    step "验证安装..."
    step "🔍 验证安装..."

# 检查服务状态
if systemctl is-active --quiet x-ui; then
        info "✓ 服务运行正常"
        info "✅ 服务运行正常"
else
warn "⚠ 服务未运行，但安装已完成"
return 0
@@ -370,19 +411,19 @@ verify_installation() {
# 检查端口监听
if command -v netstat >/dev/null 2>&1; then
if netstat -tunlp 2>/dev/null | grep -q ":${PANEL_PORT} "; then
            info "✓ 端口 ${PANEL_PORT} 监听正常"
            info "✅ 端口 ${PANEL_PORT} 监听正常"
else
warn "⚠ 端口 ${PANEL_PORT} 未监听"
fi
elif command -v ss >/dev/null 2>&1; then
if ss -tunlp 2>/dev/null | grep -q ":${PANEL_PORT} "; then
            info "✓ 端口 ${PANEL_PORT} 监听正常"
            info "✅ 端口 ${PANEL_PORT} 监听正常"
else
warn "⚠ 端口 ${PANEL_PORT} 未监听"
fi
fi

    info "验证完成"
    info "✅ 验证完成"
}

# 显示安装信息
@@ -391,54 +432,67 @@ show_info() {
local server_ip=$(curl -s --connect-timeout 5 ipv4.icanhazip.com || hostname -I | awk '{print $1}' || echo "你的服务器IP")

echo
    info "=================================================="
    info "🎉 x-ui 多架构安装完成！"
    info "=================================================="
    info "系统架构: $(uname -m) → $DETECTED_ARCH"
    info "管理面板: http://${server_ip}:${PANEL_PORT}"
    info "用户名: $PANEL_USERNAME"
    info "密码: $PANEL_PASSWORD"
    info ""
    info "面板状态: 已自动配置为指定端口和账号"
    info ""
    echo -e "${GREEN}╔══════════════════════════════════════════════════╗"
    echo -e "║                                                      ║"
    echo -e "║    🎉 X-UI 多架构安装完成！咸v咆哮牛逼！            ║"
    echo -e "║                                                      ║"
    echo -e "╚══════════════════════════════════════════════════╝${NC}"
    echo
    info "🖥️  系统架构: $(uname -m) → $DETECTED_ARCH"
    info "🌐 管理面板: http://${server_ip}:${PANEL_PORT}"
    info "👤 用户名: $PANEL_USERNAME"
    info "🔑 密码: $PANEL_PASSWORD"
    echo
    cyan "💡 面板状态: 已自动配置为指定端口和账号"
    echo
warn "⚠️  重要安全提醒:"
warn "1. 请立即访问面板验证登录"
    warn "2. 建议定期修改密码"
    warn "2. 建议定期修改密码" 
warn "3. 确保防火墙已正确配置"
    info ""
    info "常用命令:"
    info "启动服务: systemctl start x-ui"
    info "停止服务: systemctl stop x-ui"
    info "重启服务: systemctl restart x-ui"
    info "查看状态: systemctl status x-ui"
    info "查看日志: journalctl -u x-ui -f"
    info "管理菜单: x-ui"
    info "=================================================="
    echo
    info "🔧 常用命令:"
    info "   启动服务: systemctl start x-ui"
    info "   停止服务: systemctl stop x-ui"
    info "   重启服务: systemctl restart x-ui"
    info "   查看状态: systemctl status x-ui"
    info "   查看日志: journalctl -u x-ui -f"
    info "   管理菜单: x-ui"
echo

# 显示访问URL
    step "立即访问: http://${server_ip}:${PANEL_PORT}"
    step "使用账号: $PANEL_USERNAME 密码: $PANEL_PASSWORD"
    echo
    echo -e "${CYAN}"
    echo "╔══════════════════════════════════════════════════╗"
    echo "║                 🚀 立即访问 🚀                 ║"
    echo "║                                                  ║"
    echo "║     http://${server_ip}:${PANEL_PORT}           ║"
    echo "║                                                   ║"
    echo "║           👤 账号: $PANEL_USERNAME               ║"
    echo "║            🔑 密码: $PANEL_PASSWORD              ║"
    echo "║                                                  ║"
    echo "╚══════════════════════════════════════════════════╝"
    echo -e "${NC}"
}

# 显示架构信息
show_arch_info() {
echo
info "🖥️  支持的架构列表:"
    echo "  x86_64  - 64位 Intel/AMD 处理器 → amd64"
    echo "  i386    - 32位 Intel/AMD 处理器 → 386" 
    echo "  aarch64 - 64位 ARM 处理器 → arm64"
    echo "  armv7l  - 32位 ARM v7 → armv7"
    echo "  armv6l  - 32位 ARM v6 → armv6"
    echo "  armv5l  - 32位 ARM v5 → armv5"
    echo "  s390x   - IBM 大型机 → s390x"
    echo -e "  ${CYAN}x86_64${NC}  - 64位 Intel/AMD 处理器 ${GREEN}→ amd64${NC}"
    echo -e "  ${CYAN}i386${NC}    - 32位 Intel/AMD 处理器 ${GREEN}→ 386${NC}" 
    echo -e "  ${CYAN}aarch64${NC} - 64位 ARM 处理器 ${GREEN}→ arm64${NC}"
    echo -e "  ${CYAN}armv7l${NC}  - 32位 ARM v7 ${GREEN}→ armv7${NC}"
    echo -e "  ${CYAN}armv6l${NC}  - 32位 ARM v6 ${GREEN}→ armv6${NC}"
    echo -e "  ${CYAN}armv5l${NC}  - 32位 ARM v5 ${GREEN}→ armv5${NC}"
    echo -e "  ${CYAN}s390x${NC}   - IBM 大型机 ${GREEN}→ s390x${NC}"
echo
}

# 主函数
main() {
    info "开始 x-ui 多架构自动安装..."
    show_banner
    show_roar
    
    info "🚀 开始 x-ui 多架构自动安装..."
show_arch_info

# 执行安装步骤
@@ -455,19 +509,26 @@ main() {
verify_installation
show_info

    info "安装脚本执行完毕"
    echo
    echo -e "${RED}╔════════════════════════════════════════╗"
    echo -e "║                                            ║"
    echo -e "║   ${YELLOW}🎊 安装完成！咸v咆哮感谢使用！${RED}      ║"
    echo -e "║   ${GREEN}💪 有問題就咆哮，老子帮你搞定！${RED}      ║"
    echo -e "║                                            ║"
    echo -e "${RED}╚════════════════════════════════════════╝${NC}"
    echo
}

# 显示欢迎信息
show_banner
echo
warn "🚀 x-ui 多架构自动安装脚本"
info "默认配置: 端口 ${PANEL_PORT} | 账号 ${PANEL_USERNAME}/${PANEL_PASSWORD}"
cyan "🔧 默认配置: 端口 ${PANEL_PORT} | 账号 ${PANEL_USERNAME} | 密码 ${PANEL_PASSWORD}"
echo

read -p "是否继续安装? (y/N): " -n 1 -r
read -p "🔥 是否开始安装? (y/N): " -n 1 -r
echo
if [[ ! $REPLY =~ ^[Yy]$ ]]; then
    info "安装已取消"
    info "👋 安装已取消"
exit 0
fi